Our Solutions

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

Document Download

OPTEX WLPS, Revolution of Wireless Long-range Perimeter Solution

WLPS is a wireless security system that is the most suitable for factories’ perimeter monitoring.

Nowadays, every company attends to control budget and save security cost. Hybrid PIDS of manned guarding and intrusion alarm system is the solution because the initial cost of PIDS can be paid within first year and the site owner will immediately gain the benefit of cost reduction. However, when the site becomes larger, there is cost concern to conventional hard wired solution because the initial cost such as wiring & installation will also increase to cover the large site and it decreases the total benefit for the end-users to receive. OPTEX have addressed these problems with the introduction of the WLPS – Wireless Long range Perimeter Solution alarm system.

WLPS security sensors transmit the wireless signal with power level of over 20 times higher than conventional wireless alarm system. In addition, each security sensor works as a transceiver to create wireless mesh network with multi-hopping. In result, WLPS wireless range can cover up to 500m x 500m per site and the customers can enjoy the full benefit of wireless system advantages as follows.

Great Benefits of Wireless Alarm System

1. Flexible Location
2. Wireless Stylish Design
3. Free from lightning damage
4. Installation to existing facility
5. Quick & easy installation and maintenance

Significant Cost Reduction

Typical wired perimeter system requires substantial initial cost such as wiring, trenching, conduit, and concrete work as well as installation time.With WLPS, those cost and time can be reduced significantly – a total cost reduction for end customer is minimum 40% compared to the conventional wired system.


*Calculation based on a scale of 100m x 100m factory

Long Battery Life

Some, or pronanly most alarm system installers have faced battery life issues in wireless devices. This is far from ideal since it would have affect reliability of system itself, requres additional support time & cost and etc.Optex Battery operated detectors are designed to work efficiently and the detectors consume extremely low current which make battery life time longer.
 

Featured Product: SL-350QFR & SL-100/200TNR

OPTEX SL-350QFR and SL-100/200TNR, a 100m, 60m, 30m battery-powered wireless photobeam detectors are the perfect solution for the perimeter protection. In addition to WLPS, both models are compatible with most manufacturers’ wireless alarm systems. OPTEX wireless photobeams are Dual or Quad beam detectors that benefit to excellent immunity to wildlife like birds. In order to trigger the alarm, an animal has to break both detection beams simultaneously. This reduces dramatically the chance of false alarms. OPTEX line up various type of indoor and outdoor detectors for WLPS. Please contact OPTEX Thailand for more detail.

Application Examples

WLPS Specification

  • Operating Frequency : 920–925 MHz
  • Power Output : Max 250mW

Document Download

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Reverse Detection System “R1002“ for Airport

Prevent the loss that may effect to airports and passengers from Reversing problem, the current common Countermeasure against revering airport in the case of security guard and managing by gate is not cover this situation, so you should use our sensor, R1002 with system can recognize a movement flow of plural persons and detects only a person who goes opposite direction through image sensing technology and Vector Focal Method, our unique detection method can grasps and analyze a shape of human.

Current common Countermeasure against reversing at airport

Prevent the loss that may effect to airports and passengers from Revesing problem.

OPTEX Revesing sensor “R1002”

Our unique detection method [Vector Focal Method] grasps and tracks a shape of human.

System configuration Diagram

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

OPTEX WLPS, Revolution of Wireless Long-range Perimeter Solution

WLPS is a wireless security system that is the most suitable for factories’ perimeter monitoring.

Nowadays, every company attends to control budget and save security cost. Hybrid PIDS of manned guarding and intrusion alarm system is the solution because the initial cost of PIDS can be paid within first year and the site owner will immediately gain the benefit of cost reduction. However, when the site becomes larger, there is cost concern to conventional hard wired solution because the initial cost such as wiring & installation will also increase to cover the large site and it decreases the total benefit for the end-users to receive. OPTEX have addressed these problems with the introduction of the WLPS – Wireless Long range Perimeter Solution alarm system.

WLPS security sensors transmit the wireless signal with power level of over 20 times higher than conventional wireless alarm system. In addition, each security sensor works as a transceiver to create wireless mesh network with multi-hopping. In result, WLPS wireless range can cover up to 500m x 500m per site and the customers can enjoy the full benefit of wireless system advantages as follows.

Great Benefits of Wireless Alarm System

1. Flexible Location
2. Wireless Stylish Design
3. Free from lightning damage
4. Installation to existing facility
5. Quick & easy installation and maintenance

Significant Cost Reduction

Typical wired perimeter system requires substantial initial cost such as wiring, trenching, conduit, and concrete work as well as installation time.With WLPS, those cost and time can be reduced significantly – a total cost reduction for end customer is minimum 40% compared to the conventional wired system.


*Calculation based on a scale of 100m x 100m factory

Long Battery Life

Some, or pronanly most alarm system installers have faced battery life issues in wireless devices. This is far from ideal since it would have affect reliability of system itself, requres additional support time & cost and etc.Optex Battery operated detectors are designed to work efficiently and the detectors consume extremely low current which make battery life time longer.
 

Featured Product: SL-350QFR & SL-100/200TNR

OPTEX SL-350QFR and SL-100/200TNR, a 100m, 60m, 30m battery-powered wireless photobeam detectors are the perfect solution for the perimeter protection. In addition to WLPS, both models are compatible with most manufacturers’ wireless alarm systems. OPTEX wireless photobeams are Dual or Quad beam detectors that benefit to excellent immunity to wildlife like birds. In order to trigger the alarm, an animal has to break both detection beams simultaneously. This reduces dramatically the chance of false alarms. OPTEX line up various type of indoor and outdoor detectors for WLPS. Please contact OPTEX Thailand for more detail.

Application Examples

WLPS Specification

  • Operating Frequency : 920–925 MHz
  • Power Output : Max 250mW

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

OPTEX WLPS, Revolution of Wireless Long-range Perimeter Solution

WLPS is a wireless security system that is the most suitable for factories’ perimeter monitoring.

Nowadays, every company attends to control budget and save security cost. Hybrid PIDS of manned guarding and intrusion alarm system is the solution because the initial cost of PIDS can be paid within first year and the site owner will immediately gain the benefit of cost reduction. However, when the site becomes larger, there is cost concern to conventional hard wired solution because the initial cost such as wiring & installation will also increase to cover the large site and it decreases the total benefit for the end-users to receive. OPTEX have addressed these problems with the introduction of the WLPS – Wireless Long range Perimeter Solution alarm system.

WLPS security sensors transmit the wireless signal with power level of over 20 times higher than conventional wireless alarm system. In addition, each security sensor works as a transceiver to create wireless mesh network with multi-hopping. In result, WLPS wireless range can cover up to 500m x 500m per site and the customers can enjoy the full benefit of wireless system advantages as follows.

Great Benefits of Wireless Alarm System

1. Flexible Location
2. Wireless Stylish Design
3. Free from lightning damage
4. Installation to existing facility
5. Quick & easy installation and maintenance

Significant Cost Reduction

Typical wired perimeter system requires substantial initial cost such as wiring, trenching, conduit, and concrete work as well as installation time.With WLPS, those cost and time can be reduced significantly – a total cost reduction for end customer is minimum 40% compared to the conventional wired system.


*Calculation based on a scale of 100m x 100m factory

Long Battery Life

Some, or pronanly most alarm system installers have faced battery life issues in wireless devices. This is far from ideal since it would have affect reliability of system itself, requres additional support time & cost and etc.Optex Battery operated detectors are designed to work efficiently and the detectors consume extremely low current which make battery life time longer.
 

Featured Product: SL-350QFR & SL-100/200TNR

OPTEX SL-350QFR and SL-100/200TNR, a 100m, 60m, 30m battery-powered wireless photobeam detectors are the perfect solution for the perimeter protection. In addition to WLPS, both models are compatible with most manufacturers’ wireless alarm systems. OPTEX wireless photobeams are Dual or Quad beam detectors that benefit to excellent immunity to wildlife like birds. In order to trigger the alarm, an animal has to break both detection beams simultaneously. This reduces dramatically the chance of false alarms. OPTEX line up various type of indoor and outdoor detectors for WLPS. Please contact OPTEX Thailand for more detail.

Application Examples

WLPS Specification

  • Operating Frequency : 920–925 MHz
  • Power Output : Max 250mW

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

Automatic Door Sensor for Industrial Door

Optex is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding doors, as well as products for Secured Entry and Industrial door applications.

Our focus was creating an automatic door environment with sensors to offer convenience when opening and closing doors. We are now in the next stage of door evolution, working on an automatic door environment for total risk management solutions to meets market requirements in a variety of industrial door applications.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.

Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

OPTEX WLPS, Revolution of Wireless Long-range Perimeter Solution

WLPS is a wireless security system that is the most suitable for factories’ perimeter monitoring.

Nowadays, every company attends to control budget and save security cost. Hybrid PIDS of manned guarding and intrusion alarm system is the solution because the initial cost of PIDS can be paid within first year and the site owner will immediately gain the benefit of cost reduction. However, when the site becomes larger, there is cost concern to conventional hard wired solution because the initial cost such as wiring & installation will also increase to cover the large site and it decreases the total benefit for the end-users to receive. OPTEX have addressed these problems with the introduction of the WLPS – Wireless Long range Perimeter Solution alarm system.

WLPS security sensors transmit the wireless signal with power level of over 20 times higher than conventional wireless alarm system. In addition, each security sensor works as a transceiver to create wireless mesh network with multi-hopping. In result, WLPS wireless range can cover up to 500m x 500m per site and the customers can enjoy the full benefit of wireless system advantages as follows.

Great Benefits of Wireless Alarm System

1. Flexible Location
2. Wireless Stylish Design
3. Free from lightning damage
4. Installation to existing facility
5. Quick & easy installation and maintenance

Significant Cost Reduction

Typical wired perimeter system requires substantial initial cost such as wiring, trenching, conduit, and concrete work as well as installation time.With WLPS, those cost and time can be reduced significantly – a total cost reduction for end customer is minimum 40% compared to the conventional wired system.


*Calculation based on a scale of 100m x 100m factory

Long Battery Life

Some, or pronanly most alarm system installers have faced battery life issues in wireless devices. This is far from ideal since it would have affect reliability of system itself, requres additional support time & cost and etc.Optex Battery operated detectors are designed to work efficiently and the detectors consume extremely low current which make battery life time longer.
 

Featured Product: SL-350QFR & SL-100/200TNR

OPTEX SL-350QFR and SL-100/200TNR, a 100m, 60m, 30m battery-powered wireless photobeam detectors are the perfect solution for the perimeter protection. In addition to WLPS, both models are compatible with most manufacturers’ wireless alarm systems. OPTEX wireless photobeams are Dual or Quad beam detectors that benefit to excellent immunity to wildlife like birds. In order to trigger the alarm, an animal has to break both detection beams simultaneously. This reduces dramatically the chance of false alarms. OPTEX line up various type of indoor and outdoor detectors for WLPS. Please contact OPTEX Thailand for more detail.

Application Examples

WLPS Specification

  • Operating Frequency : 920–925 MHz
  • Power Output : Max 250mW

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

Automatic Door Sensor for Industrial Door

Optex is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding doors, as well as products for Secured Entry and Industrial door applications.

Our focus was creating an automatic door environment with sensors to offer convenience when opening and closing doors. We are now in the next stage of door evolution, working on an automatic door environment for total risk management solutions to meets market requirements in a variety of industrial door applications.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.

Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Anti-Tailgating System

Detecting unauthorized entry by tailgating system in real time with Accurance OV-102, the ceiling mount tailgated detection, install at the entry of any building to handle important information, prevent leakage of personal information and internal control. Accurance OV-102 is one application of Access Control System and the detection is designed to use the 3D virtual modeling technology to track and analyze the human shape with a high degree of accuracy.

System construction according to customers’security levels

Our tailgating detection system allows customers to establish a security system while effectively utilizing existing facilities, according to their security needs, installation sites, and budgets.

Deterrence and warning


If tailgating occurs, a warning is given against unauthorized entry via an alarm and warning lamp.
This system can optimize the use of existing facilities and access control system, enabling customers to reduce capital investment.

Simplified prevention


When the presence of two or more people is detected in the detection area, a warning signal is sent out.
The automatic unlock function is disabled by sending the signal to the electric lock control board.


System Configuration

The system relating with Access control system which have dry relay contact.

System configuration diagram (example)


Benefit of ACCURANCE OV-102

  • Improve the security for access control system and minimize the risk to important information, property loss and personal safety from the unauthorized people can entry the are.
  • High Accuracy Count and Reliable Detection with the 3D virtual modeling of human shape and tracking technology.
  • Cost Efficiency, sensor can recognize human movement, count people to apply for Marketing, Store Management and Counting Traffic.
  • Flexible Installation, ability to be set on browser via Lan network and be installed to an existing building, no need to change room layout.

Factory Automation Sensors

Photoelectric Sensors Applications

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

OPTEX WLPS, Revolution of Wireless Long-range Perimeter Solution

WLPS is a wireless security system that is the most suitable for factories’ perimeter monitoring.

Nowadays, every company attends to control budget and save security cost. Hybrid PIDS of manned guarding and intrusion alarm system is the solution because the initial cost of PIDS can be paid within first year and the site owner will immediately gain the benefit of cost reduction. However, when the site becomes larger, there is cost concern to conventional hard wired solution because the initial cost such as wiring & installation will also increase to cover the large site and it decreases the total benefit for the end-users to receive. OPTEX have addressed these problems with the introduction of the WLPS – Wireless Long range Perimeter Solution alarm system.

WLPS security sensors transmit the wireless signal with power level of over 20 times higher than conventional wireless alarm system. In addition, each security sensor works as a transceiver to create wireless mesh network with multi-hopping. In result, WLPS wireless range can cover up to 500m x 500m per site and the customers can enjoy the full benefit of wireless system advantages as follows.

Great Benefits of Wireless Alarm System

1. Flexible Location
2. Wireless Stylish Design
3. Free from lightning damage
4. Installation to existing facility
5. Quick & easy installation and maintenance

Significant Cost Reduction

Typical wired perimeter system requires substantial initial cost such as wiring, trenching, conduit, and concrete work as well as installation time.With WLPS, those cost and time can be reduced significantly – a total cost reduction for end customer is minimum 40% compared to the conventional wired system.


*Calculation based on a scale of 100m x 100m factory

Long Battery Life

Some, or pronanly most alarm system installers have faced battery life issues in wireless devices. This is far from ideal since it would have affect reliability of system itself, requres additional support time & cost and etc.Optex Battery operated detectors are designed to work efficiently and the detectors consume extremely low current which make battery life time longer.
 

Featured Product: SL-350QFR & SL-100/200TNR

OPTEX SL-350QFR and SL-100/200TNR, a 100m, 60m, 30m battery-powered wireless photobeam detectors are the perfect solution for the perimeter protection. In addition to WLPS, both models are compatible with most manufacturers’ wireless alarm systems. OPTEX wireless photobeams are Dual or Quad beam detectors that benefit to excellent immunity to wildlife like birds. In order to trigger the alarm, an animal has to break both detection beams simultaneously. This reduces dramatically the chance of false alarms. OPTEX line up various type of indoor and outdoor detectors for WLPS. Please contact OPTEX Thailand for more detail.

Application Examples

WLPS Specification

  • Operating Frequency : 920–925 MHz
  • Power Output : Max 250mW

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

Security System by Layer Protection for Video Surveillance

Multi-layered protection for an earlier alarm and a better response. The highest security for industrial sites and commercial premises, product performance and reliability area key, as is a strategic approach to perimeter protection. This system helps protect Perimeter, Sites, Roofs, Building and offer a wide range of technologies to suit all types of site configuration and environment including harsh outdoor conditions.

More advanced surveillance system with REDSCAN series

Laser Scan Detector can identify the size, speed and movement direction of detected objects. They effectively create a cordon of security surrounded by invisible wall. Optex has combined laser sensors with surveillance cameras to create an advanced surveillance system enabling use in both indoor and outdoor environment. Optex has received several product awards around the world. It is in widespread use to protect infrastructure and critical facilities.

Vertical and Horizontal detection modes


Adjustable detection pattern up to 4-8 zones depends on REDSCAN series and application

Improve Security with integration OPTEX and CCTV Systems

Integrating Optex IP sensors and detectors with your Video Management Software increases the effectiveness of video detection and surveillance applications by addressing common problems associated with video driven solutions.

System Diagram

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Security System by PIDS

PIDS, Perimeter Intrusion Detection System, an effective solution to implement the security system to pretect and secure before the intruders enter the property. OPTEX has developed a sensor and system of enhanced outdoor, especially perimeter and boudary are, and indoor surveillance that is capable of forestalling unauthorized entry into your property and building.

Benefits of PIDS

  • Improved Perimeter Security and Professional security 24/7.
  • Increase effectiveness of Man-guards and limited Human Error
  • Efficiency decreasing security cost.

OPTEX Hybrid Security Solution to protect the perimeter

Effectively secure perimeter by Man Guard, CCTV and Optex, highly reliable outdoor sensor. When the sensor detect intruders, the alarm will be triggered by activating a siren or flushing light and then send the report to control room in order to dispatch on time and right location before they intrude on the property and premise.

Long-Term Cost Saving

Increasing yearly of security cost is a matter that have to find a solution. The case studies of reducing cost with OPTEX Hybrid Security Solution experienced efficiency to cut down the fixed cost of your factory. For more information, please refer to the PIDS catalog.

Automatic Door Sensor for Pedestrian Door

OPTEX is the preferred supplier for Entrance detection systems. Our portfolio includes safety and activation solutions for automatic Swing and Sliding door as well as products for Secured Entry and Industrial door applications.

About 40 years ago, OPTEX developed automatic door sensors for the first time in the world, using far-infrared rays which had been used mainly for military applications. We continually develop and manufacture a variety of sensors for safer and easier automatic door use for Swing and Sliding door with our Activation and Safety Sensors and “BLUE-ZONE” technology which is unique and provides the highest level of safety in the threshold.

Activation & Safety Sensors

Combine functions of activation, to operate automatic doors, and safety, to prevent pedestrians from getting caught by the door. OPTEX Activation and Safety Sensors include a Presence Detection area to detect people who have stopped near the threshold of the door. The use of an active infrared Activation and Safety Sensor provides additional safety around the door.


Activation Sensor

Activation Sensors can be installed in a door transom or the ceiling to activate (operate) automatic doors by sensing approaching people or objects. OPTEX has an array of activation sensors, including sensors that use infrared or microwave technology. Take a look at the detection methods used in each sensor to decide which is best for your door environment.


“BLUE ZONE” Technology

The “BLUE ZONE” is unique and is setting the trend for automatic door threshold safety. When the approach area detects a person or object, the sensor will activate the door and turn on the “BLUE ZONE” which detects through the threshold. As long as someone is in the detection area, the sensor will keep the door in the open position. Once the area is cleared, the BLUE ZONE will ignore the door panels and allow the door to safely close.


In Thailand, we provide 2 models with BLUE ZONE technology

People Counting System (PALOSSIE AIO)

Add more profit for your business and efficiency enhance sales & marketing planning, human resources and areas management such as selling ads, area rental fee rate and also cost saving with OPTEX 3D Technology Sensor, high accuracy than 95% to measure the number of people traversing a certain passage or entrance. (more…)

Vehicle Detection Sensor (ViiK)

ViiK, the unique sensor solution for car parking management from OPTEX, no need to stop the traffic for construction or dig the ground. ViiK is very easy installation and suitable for the barrier, slide and swing gate, it can be mounted nearly a gate to open the gate, activate ticket machine and close gate after a car completely pass through. To provide more reliability of detection, ViiK is designed to use Microwave and Ultrasonic technology to detect the presence and motion of vehicles and also can ignore human movement.

Benefit to choose ViiK

  • Makes Installation Easier and More Cost Effective
    With the OVS-01GT, there is no need to stop traffic through the doorway during installation. It mounts quickly, easily and wires directly to the door operator. No additional loop detector is required. No need for special programmers. A simple to use menu with visual indicators provides a simple and quick installation. Also, once mounted, its location allows for full adjustment without the need for lifts or ladders.
  • Reliability detect vehicle with combination Microwave and Ultrasonic Detection Patterns.
  • Stable accuracy, ignore human movement
  • Eliminates the hassle of a ground loop devices
  • Detection area can be customized easily
  • Sensitive for Carbon Fiber Reinforced Plastics (CFRP)

Wireless Outdoor Alarm System

Protect your house 24 hours / 7 days
Safety and Peace of mind with Wireless Outdoor Alarm System

Outdoor security which Optex believes

Home CCTV is a useful solution to record and know “What happened in the past”.
However, it does not give you any notifications when an intruder breaks into your house.

Optex believes that having outdoor security is the most effective way to secure your safety.
Imagine that you run into an intruder in your house. This is the worst situation.
With outdoor security, it can notify you right after an intruder reaches your garden so that you can respond it earlier or even turn them away by the sound of outdoor siren.

What is GENIO ?

GENIO is a wireless outdoor alarm system from Optex. GENIO alarm system can watch your home for 24 hours / 7 days including outdoor premises such as garden and backyard.
This enables to realize the most important measure for home security,to prevent the dangerous situation of your family before something happens, and bring you the life of safety and peace of mind.
Optex who has been engaged in security industry since 1979 and receives high marks of appreciation for its reliable outdoor alarm system worldwide highly recommends GENIO for your home security.
  • Arming
  • Detection
  • Activation

GENIO Alarm Monitoring System

GENIO is a wireless outdoor alarm system from Optex.
GENIO alarm system can watch your home for 24 hours / 7 days including outdoor premises such as garden and backyard.

– Perimeters
– Premises / Garden
– Windows
– Inside Rooms

System Overview

Benefit

  • Outdoor Security: It’s effective for your safety to send an intruder away from your property before break-in occurs.
  • Remote Notification: GENIO lets you know an emergency even when you go out.
  • Remote Controlling: Arm / disarm can be set by GENIO smartphone app.
  • Beauty & Agility: You don’t have to ruin your garden for installation.
  • Invisible Fence: No physical fence would be required anymore.
  • Emergency Notification: You can notify your family when emergency with a special PIN code.

トップへ戻る