Advanced surveillance system with REDSCAN

The protection of outdoor assets and the prevention of unauthorized entry are a serious issue for large properties, such as commercial facilities, logistics centers, power plants, and offices or industrial facilities.
In Thailand, the most common solution addressing these issues is to deploy security guards on site. However, this option is costly and poses the risk of human error. One option for solving security issues is remote / local video response, in which the security guards use CCTV connected with motion sensors. When the sensor detects an intrusion, a linked camera captures the image, and sends it to the guard room, and security guards can head to the site for check. Using CCTV with motion sensors could achieve more efficient security than using security guards only.
Synchronization of detectors and CCTV is crucial for both local video response and remote video response. In addition, the detectors must be matched with the cameras to provide reliable operation with minimal false alarms to handle numerous potential causes of false alarms, such as small animals, heavy rain, sunshine, and plants. Easy installation and adjustment can with setting up the detectors and cameras properly.
With its high-reliability detection technology, REDSCAN is well known as the leading brand of external detectors for remote video response applications and provides the optimal solutions worldwide for video surveillance needs.


Part of the ONVIF profile S compliant REDSCAN Pro Series, RLS-50100V/RLS-3060V is the LiDAR sensor providing very accurate detection of intruders and moving objects within a range of 50 m x 100 m and 30m x 60m, without any gaps and keeping the same detection resolution in the near and far. Equipped with OPTEX’s most advanced technology it provides excellent detection performance not affected by variable lighting, temperature or environmental changes, making it the best solution for high security sites.

Achieve more with just one sensor

RLS-50100V provides 50 x 100 m, 190 degree detection allowing to protect wide areas, with just one sensor. The detection area can be divided in up to 8 independent zones, and for each of them the object target size, sensitivity and output can be customized. It gives great flexibility to adapt the settings depending on the zones location and level of threat. For instance one detection zone can be set to detect people, while another is set to detect vehicles, or one zones can be set as pre-warning and another as immediate security alert. The REDSCAN Pro’s detection range and versality enables to achieve what is usually done by multiple sensors. In addition the sensor has a built-in camera which can record on the device, alarm events and save both logs and pre-post event photos and videos, to be used as additional support to review what triggered the alarm and make any adjustments necessary to the settings. REDSCAN Pro can analyze the size, the speed and the distance of the moving objects, providing point detection by tracking the X & Y coordinates of the moving objects. A further advantage of LiDAR technology is that the detection performance is stable at any time without being affected by variable lighting or temperature. RLS-50100V provides a high detection resolution of 0.125 degrees.

Connectivity and Network Security

REDSCAN Pro is complied with ONVIF profile S and alarm outputs can be transmitted to ONVIS compliant networked video system or IP network devices. The video stream of the assistance camera could also be provided to the Video Management Software platform via the ONVIF RTSP protocol.
In order to enhance the network security, the REDSCAN Pro is compliant with HTTPS, SNMPv3 protocols.

Easy installation and maintenance

REDSCAN Pro is equipped with built-in assistance camera which simplifies installation and walk test. Through a laser line overlay on the camera view, it provides a very useful visual guidance on where the detection area is on scene, allowing to adjust the angle of detection of the sensor. Additionally, the RLS-50100V features a built-in adjustment bracket within its housing to allow a tilt of -5 degree to 95 degree and a side adjustment is -/+ 5 degree. Horizontal, vertical and tilted mounting options can all be achieved without the need of an additional bracket.
The configuration settings is done via web browser which allows an easy remote access. The settings can be copied from one device to another, providing they are the same model (from one RLS-50100V to another RLS-50100V).


Visualization of detection area
A laser guideline and indicators of detected objects are shown on detection area. It is useful for a rough adjustment.

Built-in angle adjustment function
Tilt 5 to -95 degrees, roll +-5 degrees (Mechanical adjustment)
Side +- 5 degrees (software adjustment)

Event log function
Logs are stored when alarm is triggered.

Assistance camera (2 MP, 170 degrees)
Photos can be taken before & after alarm is triggered
It support you to find what made alarm signals visually

Related Products

Contact us

Please feel free to contact us for further information.
We are always eager to support you and propose a solution that suits your needs.